AV-SCANNER guides
Service function guides
Resets, relearns, calibrations and repairs, step by step. Each guide is free to read here and to download as a branded PDF for the workshop.
Automatic Transmission Adaptation Reset
Reset shift adaptations after service or repair
Transmission Fluid Service
Change fluid at the correct temperature and level
Dual-Clutch Adaptation
Teach kiss points after clutch or mechatronic work
Clutch Pedal Position Learn
Relearn clutch pedal switches and sensors
Transfer Case and AWD Calibration
Initialise all-wheel drive actuators
Transmission Live Data Diagnosis
Use slip, temperature and solenoid data to diagnose
CVT Fluid and Adaptation Service
Service a CVT and relearn its values
Clutch Replacement Planning
Diagnose a worn clutch and plan its replacement
Clutch Hydraulic Bleeding
Bleed clutch master and slave cylinders
Differential Oil Service
Change differential oil and check for wear
CV Joint and Driveshaft Service
Diagnose clicking joints and replace driveshafts
Transmission Slip Diagnosis
Diagnose slipping, flare and harsh shifts
Limp Mode Diagnosis
Find why a car is stuck in limp mode
Manual Gearbox Oil Service
Change gear oil and cure notchy shifts
Gear Selector Cable Adjustment
Adjust cables and fix selector faults
Torque Converter Diagnosis
Find shudder, slip and stall faults
Transmission Leak Tracing
Find and repair fluid leaks
Four-Wheel Drive Engagement Faults
Diagnose 4WD that will not engage or release
Use them with the AV-SCANNER
Look up a fault code, run a local diagnosis and open the right guide from the reader's own menus.
