AV-SCANNER guides
Service function guides
Resets, relearns, calibrations and repairs, step by step. Each guide is free to read here and to download as a branded PDF for the workshop.
Electronic Parking Brake Service Mode
Retract and re-apply an EPB for pad replacement
ABS Bleeding
Run the automated bleed sequence after opening the system
Brake Fluid Replacement
Flush brake fluid correctly on a modern ABS car
Brake Pad Wear Sensor Reset
Replace the sensor and clear the service warning
Wheel Speed Sensor Diagnosis
Test sensors and tone rings using live ABS data
Brake Booster and Vacuum Pump Test
Confirm assist and vacuum supply
Pressure Sensor Calibration
Zero the brake pressure and yaw inputs after repairs
Brake Pad and Disc Replacement
Replace pads and discs and bed them in
Brake Caliper Service
Rebuild or replace sticking calipers
Brake Vibration Diagnosis
Find the cause of judder under braking
ABS Module Diagnosis
Diagnose pump, valve and module faults
Handbrake Adjustment
Adjust a mechanical parking brake correctly
Traction Control Fault Diagnosis
Trace traction and stability warning lights
Soft Brake Pedal Diagnosis
Find air, leaks and master cylinder faults
Brake Noise Diagnosis
Trace squeal, grinding and clicking
Master Cylinder Replacement
Bench bleed and fit a master cylinder
Brake Hose and Line Inspection
Check for rust, swelling and leaks
Drum Brake Service
Service and adjust drum brakes
Use them with the AV-SCANNER
Look up a fault code, run a local diagnosis and open the right guide from the reader's own menus.
