AV-SCANNER guides
Resets, relearns, calibrations and repairs, step by step. Each guide is free to read here and to download as a branded PDF for the workshop.
Reset the oil service interval after an oil and filter change
How the car calculates oil life and when to trust it
Relearn the electronic throttle after cleaning or replacement
Restore a stable idle after a battery or sensor change
Teach the computer tooth-to-tooth crank variation
Check and service cam phasers and oil control valves
Use cam and crank correlation data to judge chain wear
Prove the mechanical health of each cylinder
Replace ignition parts and confirm the misfire has gone
Clean, test and confirm a MAF sensor with live data
Know when a belt is due and what to replace with it
Measure and correct valve clearances
Test crankcase ventilation and cure oil consumption
Measure real oil pressure and trace warning lights
Find the true source of an engine oil leak
Check shaft play, boost leaks and oil supply
Pressure test the intake and find boost leaks
Test knock sensors and read knock retard data
Find a misfire by cylinder using scan data and swaps
Work through the causes of an unstable idle
Diagnose vibration and worn mounts
Inspect and replace the belt, tensioner and idlers
Read viscosity and specifications and pick the right oil
Find where the oil is going
Look up a fault code, run a local diagnosis and open the right guide from the reader's own menus.
Get the app
Quick access from your home screen.