What does code P2810 mean?

Q: What does code P2810 mean?

Pressure Control Solenoid G Electrical. P2810 indicates that the transmission control module (TCM) has detected an electrical fault in the circuit for pressure control solenoid G, which is one of several solenoids that regulate hydraulic pressure inside the automatic transmission. The TCM monitors the solenoid's electrical current and voltage and sets this code when the readings fall outside the expected range, signaling an open circuit, short circuit, or solenoid coil failure.

DTC codes / P28xx · Transmission / P2810

P2810Pressure Control Solenoid G Electrical

P2810 indicates that the transmission control module (TCM) has detected an electrical fault in the circuit for pressure control solenoid G, which is one of several solenoids that regulate hydraulic pressure inside the automatic transmission. The TCM monitors the solenoid's electrical current and voltage and sets this code when the readings fall outside the expected range, signaling an open circuit, short circuit, or solenoid coil failure.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.