What does code P2811 mean?

Q: What does code P2811 mean?

Pressure Control Solenoid G Intermittent. P2811 indicates that the transmission control module (TCM) has detected an intermittent electrical fault in the circuit for pressure control solenoid G, which is used to regulate hydraulic pressure inside the automatic transmission. The TCM monitors the solenoid's commanded current versus actual current or circuit continuity, and it sets this code when the signal drops out or becomes erratic for a brief period rather than failing completely.

DTC codes / P28xx · Transmission / P2811

P2811Pressure Control Solenoid G Intermittent

P2811 indicates that the transmission control module (TCM) has detected an intermittent electrical fault in the circuit for pressure control solenoid G, which is used to regulate hydraulic pressure inside the automatic transmission. The TCM monitors the solenoid's commanded current versus actual current or circuit continuity, and it sets this code when the signal drops out or becomes erratic for a brief period rather than failing completely.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyIntermediate

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.