What does code P2419 mean?

DTC codes / P24xx · Auxiliary emission controls / P2419

P2419Evaporative Emission System Switching Valve Control Circuit Low

P2419 means the powertrain control module (PCM) has detected a low-voltage condition on the control circuit for the evaporative emission (EVAP) system switching valve, which is often called the purge valve or canister vent valve depending on the vehicle. The PCM commands the valve on or off and monitors the circuit for expected voltage; when the signal stays below the normal threshold for longer than a calibrated time, it stores this code and turns on the check engine light.

SystemPowertrain

Code typeGeneric (all makes)

SeverityLow

Fix difficultyIntermediate

AreaAuxiliary emission controls

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.