What does code P2708 mean?

Q: What does code P2708 mean?

Shift Solenoid 'F' Stuck On. P2708 indicates that the transmission control module (TCM) has detected an abnormal condition where shift solenoid 'F' is stuck in the energized or 'on' state, meaning hydraulic pressure is being applied when it should not be. The TCM monitors solenoid circuit feedback and compares it to commanded state; when the actual current or pressure response indicates the solenoid is continuously on, it sets this code and often defaults to a limp-home mode.

DTC codes / P27xx · Transmission / P2708

P2708Shift Solenoid 'F' Stuck On

P2708 indicates that the transmission control module (TCM) has detected an abnormal condition where shift solenoid 'F' is stuck in the energized or 'on' state, meaning hydraulic pressure is being applied when it should not be. The TCM monitors solenoid circuit feedback and compares it to commanded state; when the actual current or pressure response indicates the solenoid is continuously on, it sets this code and often defaults to a limp-home mode.

SystemPowertrain

Code typeGeneric (all makes)

SeverityHigh

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.