What does code P2706 mean?

Q: What does code P2706 mean?

Shift Solenoid 'F'. P2706 indicates that the transmission control module (TCM) has detected an electrical fault in the circuit for shift solenoid 'F', which is one of the solenoids that controls hydraulic pressure to engage or release a specific clutch or band inside the automatic transmission. The TCM monitors the solenoid's electrical current and voltage and sets this code when the measured values fall outside the expected range, indicating an open circuit, short to ground, or short to power.

DTC codes / P27xx · Transmission / P2706

P2706Shift Solenoid 'F'

P2706 indicates that the transmission control module (TCM) has detected an electrical fault in the circuit for shift solenoid 'F', which is one of the solenoids that controls hydraulic pressure to engage or release a specific clutch or band inside the automatic transmission. The TCM monitors the solenoid's electrical current and voltage and sets this code when the measured values fall outside the expected range, indicating an open circuit, short to ground, or short to power.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.