What does code P1362 mean?

Q: What does code P1362 mean?

IC Cylinder 2 Not Toggling After Enable. P1362 on Chrysler vehicles means the powertrain control module (PCM) commanded the ignition coil for cylinder 2 to fire, but the coil's feedback circuit never showed the expected voltage toggle, so the PCM cannot confirm the coil actually energized. The engine may run rough or set a misfire code, but often the only clue is the stored P1362 itself.

DTC codes / Chrysler codes / P1362

P1362 · ChryslerIC Cylinder 2 Not Toggling After Enable

P1362 on Chrysler vehicles means the powertrain control module (PCM) commanded the ignition coil for cylinder 2 to fire, but the coil's feedback circuit never showed the expected voltage toggle, so the PCM cannot confirm the coil actually energized. The engine may run rough or set a misfire code, but often the only clue is the stored P1362 itself.

SystemPowertrain

Code typeChrysler specific

SeverityMedium

Fix difficultyIntermediate

AreaIgnition system and misfire

Guidance is general and written for Chrysler vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.