01 Can a Bad Alternator Cause Power Steering Problems? • 02 What Happens If the Timing Chain of Your Car Breaks? • 03 What Happens When Piston Rings Fail? • 04 P0032 H02S heater control circuit high (Bank 1 sensor 1) • 05 The Hidden Cause of Poor Fuel Economy After Basic Repairs • 06 U0003, U0004, U0005, U0006, U0007, and U0008: High Speed CA… • 07 Why Your Car Is Losing Coolant But No Leak and What Should … • 08 The Hidden Pattern Behind Intermittent Dashboard Warnings • 09 How to Fix an Engine That Cuts Out and Restarts While Drivi… • 10 Is it cheaper to run a generator on gas or propane? •

AV-SCANNER / IMMO guides / Keys

IMMO guideReplacing a Worn Metal Key Blade

This guide explains how to replace a worn metal key blade while preserving the vehicle's immobiliser (IMMO) transponder, covering system operation, legal ownership requirements, professional service routes, and manufacturer-approved procedures. It is written for lawful owners and technicians who need a clear, practical path to a safe and functional key. You will learn how to verify the work, avoid common scams, and prevent premature wear, with all sensitive immobiliser operations directed to dealers and registered automotive locksmiths.

CategoryKeys
DifficultyProfessional
Time needed2 to 4 hours
Length12 sections

Guidance is general and covers many makes. Exact procedures and values vary by model, so confirm them in the factory service information for your vehicle.

Keep the full guide

Download all 12 sections as a branded PDF to use in the workshop.

Running on fumes Free guides aren't free to make. Top up the tank. Any amount, one time. Fuel the Garage