What does code P2849 mean?

Q: What does code P2849 mean?

Shift Fork A Stuck. P2849 means the transmission control module (TCM) commanded Shift Fork A to move, but the fork did not reach the position the TCM expected within its calibrated window. The TCM typically compares the commanded fork position against a position sensor or motor feedback signal and sets the code when the two disagree.

DTC codes / P28xx · Transmission / P2849

P2849Shift Fork A Stuck

P2849 means the transmission control module (TCM) commanded Shift Fork A to move, but the fork did not reach the position the TCM expected within its calibrated window. The TCM typically compares the commanded fork position against a position sensor or motor feedback signal and sets the code when the two disagree.

SystemPowertrain

Code typeGeneric (all makes)

SeverityHigh

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.