What does code P2841 mean?

Q: What does code P2841 mean?

Shift Fork D Position Circuit Range/Performance. P2841 indicates that the transmission control module has detected an out-of-range or erratic signal from the shift fork D position sensor circuit, which monitors the engagement position of the shift fork for gear D. The computer compares the sensor voltage against expected values for the commanded gear and sets this code when the signal falls outside the valid range or fails a rationality check.

DTC codes / P28xx · Transmission / P2841

P2841Shift Fork D Position Circuit Range/Performance

P2841 indicates that the transmission control module has detected an out-of-range or erratic signal from the shift fork D position sensor circuit, which monitors the engagement position of the shift fork for gear D. The computer compares the sensor voltage against expected values for the commanded gear and sets this code when the signal falls outside the valid range or fails a rationality check.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.