What does code P2837 mean?

Q: What does code P2837 mean?

Shift Fork B Position Circuit Range/Performance. P2837 indicates that the transmission control module (TCM) has detected an out-of-range or performance fault in the electrical circuit for shift fork B, which is used in dual-clutch or automated manual transmissions to engage a specific gear. The TCM monitors the fork's position sensor and actuator circuit and sets this code when the signal does not match the commanded position within the expected time or voltage window.

DTC codes / P28xx · Transmission / P2837

P2837Shift Fork B Position Circuit Range/Performance

P2837 indicates that the transmission control module (TCM) has detected an out-of-range or performance fault in the electrical circuit for shift fork B, which is used in dual-clutch or automated manual transmissions to engage a specific gear. The TCM monitors the fork's position sensor and actuator circuit and sets this code when the signal does not match the commanded position within the expected time or voltage window.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.