What does code P2833 mean?

Q: What does code P2833 mean?

Shift Fork A Position Circuit Low. P2833 means the transmission control module (TCM) has detected a low-voltage condition on the signal circuit for shift fork A, which is the actuator that moves the sleeve to engage or disengage a gear in an automated manual or dual-clutch transmission. The circuit is expected to carry a specific voltage, and a reading below the calibrated threshold for a set time triggers the code.

DTC codes / P28xx · Transmission / P2833

P2833Shift Fork A Position Circuit Low

P2833 means the transmission control module (TCM) has detected a low-voltage condition on the signal circuit for shift fork A, which is the actuator that moves the sleeve to engage or disengage a gear in an automated manual or dual-clutch transmission. The circuit is expected to carry a specific voltage, and a reading below the calibrated threshold for a set time triggers the code.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.