What does code P2814 mean?

Q: What does code P2814 mean?

Pressure Control Solenoid G Control Circuit Low. P2814 indicates that the transmission control module (TCM) has detected an abnormally low voltage or current on the control circuit for pressure control solenoid G, which is one of the hydraulic pressure regulators inside the transmission valve body. The TCM expects a specific electrical load when commanding the solenoid, and a low condition means the circuit is drawing less current than expected, often due to a short to ground, an open winding, or a faulty driver inside the module.

DTC codes / P28xx · Transmission / P2814

P2814Pressure Control Solenoid G Control Circuit Low

P2814 indicates that the transmission control module (TCM) has detected an abnormally low voltage or current on the control circuit for pressure control solenoid G, which is one of the hydraulic pressure regulators inside the transmission valve body. The TCM expects a specific electrical load when commanding the solenoid, and a low condition means the circuit is drawing less current than expected, often due to a short to ground, an open winding, or a faulty driver inside the module.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyProfessional

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.