What does code P2767 mean?

Q: What does code P2767 mean?

Input/Turbine Speed Sensor 'B' Circuit No Signal. P2767 means the transmission control module (TCM) is not receiving any signal from the input/turbine speed sensor 'B' circuit, so it cannot accurately measure how fast the transmission input shaft is spinning. The TCM sets this code when the circuit voltage stays outside the expected range or no pulses arrive while the vehicle is operating.

DTC codes / P27xx · Transmission / P2767

P2767Input/Turbine Speed Sensor 'B' Circuit No Signal

P2767 means the transmission control module (TCM) is not receiving any signal from the input/turbine speed sensor 'B' circuit, so it cannot accurately measure how fast the transmission input shaft is spinning. The TCM sets this code when the circuit voltage stays outside the expected range or no pulses arrive while the vehicle is operating.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyIntermediate

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.