What does code P0910 mean?

Q: What does code P0910 mean?

Gate Select Actuator Circuit/Open. P0910 indicates that the transmission control module (TCM) has detected an open circuit or excessive resistance in the gate select actuator circuit, which is responsible for moving the shift lever between gear ranges. The computer monitors the actuator's electrical path and sets this code when the expected current or voltage is outside normal limits, often preventing proper range selection.

DTC codes / P09xx · Transmission / P0910

P0910Gate Select Actuator Circuit/Open

P0910 indicates that the transmission control module (TCM) has detected an open circuit or excessive resistance in the gate select actuator circuit, which is responsible for moving the shift lever between gear ranges. The computer monitors the actuator's electrical path and sets this code when the expected current or voltage is outside normal limits, often preventing proper range selection.

SystemPowertrain

Code typeGeneric (all makes)

SeverityMedium

Fix difficultyIntermediate

AreaTransmission

Guidance is general and written for all OBD-II vehicles. Exact tests and values vary by model, so confirm the fault before replacing parts.